How to use HARZ Labs Glaze?

HARZ Labs Glaze is a gloss acrylic urethane UV-curing glaze for coating crown and bridge models for up to 2 months. It is cured without a tacky layer and does not require further polishing. HARZ Labs Glaze has high adhesion to PMMA and is suitable for milling models. Does not contain methyl methacrylate and other drug precursors.

Application instruction

Degrease the surface with isopropyl or ethyl alcohol before applying Harz Labs Glaze. Apply the clearcoat to the surface with a brush, hold for at least 60 seconds (depending on the thickness of the applied layer) to achieve complete leveling and removal of solvent residue from the surface. Cure the painted surface with a UV light source (405 nm, 4.9 mW / cm2) for at least 10 minutes. At the end of curing, the product should not have a tacky layer. Do not coat directly in the mouth.

Did the article help you?

Yes
No