ARTICLE : 284
Dental Peach
Dental Peach

Dental Peach

Designed for printing dental models. Durable, hard, and resistant to high temperature during clear aligners thermoforming. Meets the requirements OF ISO 10993.

VAT incl.
€120
1 kg
+
Peach
1 kg
+
VAT incl.
€120

Description

Dental Peach photopolymer is a matte resin made from biocompatible raw materials. Available colors: Peach (available for Form2), Beige,Bone. It has a high Shore D hardness and high tensile strength, resistant to mechanical and thermal influences. The weakly expressed smell and the absence of harmful monomers allows you to work with it even in a small laboratory. Certified for medical use. Registration certificate for a medical device No. RZN 2020/12007.

Characteristics

  • Opaque liquid Appearance
  • Peach Color
  • 7.1 ± 3.1% Elongation at break
  • 79.0 ± 2.0 Hardness Shore D
  • Weak odor Odor
  • <0.5% Shrinkage
  • 45.2 ± 4.4 MPa Tensile strength
  • 575 ± 225 mPa·s Viscosity according to Brookfield

Product video

Benefits

                        Safe

Safe

Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction. Сan be used in lab or even at home

                        Low shrinkage

Low shrinkage

Shrinkage less than 0.5% gives you the same size like 3D model on your computer and it doesn’t change size after postcuring

                        Accurate

Accurate

Provides high precision printing

                        Biocompatible

Biocompatible

Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standard ISO 10993

                        Durable

Durable

Pigments and fillers are well stabilized, no sedimentation and flocculation occur ang no foam appears

                        Heat resistance

Heat resistance

Models has long-term stability under 100°. Also has short-term stability up to 180°C and can be used for films thermosettling

                        Sertification

Sertification

Biocompatibility was confirmed by the third-party laboratories. Material was successfully tested in accordance with ISO 10993 with the provision of the MA No. RZN 2020/12007

Printers

Photos

Documents

Material Technical Data Sheet
Material safety data sheet
Download all documents