Dental Clear PRO
Description
Dental Clear is a hard PMMA-like resin, made of biocompatible raw materials. It has high accuracy and elasticity, passing for multiple installations and removal. The printed models are tasteless, odorless, and do not shrink over time. Autoclaving is recommended for sterilization and better transparency. Resistant to disinfectant solutions. The slight odor and lack of hazardous monomers allow for using it even in a small laboratory.
Characteristics
- Clear liquid Appearance
- Clear Color
- 6.2 ± 3.1% Elongation at break
- 85.0 ± 3.0 Hardness Shore D
- Weak odor Odor
- <0.5% Shrinkage
- 80.0 ± 5.0 MPa Tensile strength
- 1000 ± 200 mPa*s Viscosity according to Brookfield
Benefits
Safe
Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction. Сan be used in lab or even at home
Low shrinkage
Shrinkage less than 0.5% gives you the same size like 3D model on your computer and it doesn’t change size after postcuring
Transparent
High transparency and low yellowing after post treatment
Liquid
The resin has relatively low viscosity. It decreases time for levelling, easy to clean to provide maximum accuracy at minimum time
Biocompatible
Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standard ISO 10993
Printers
Photos
